Manufacturer | Easy Heat |
---|---|
Manufacturer Part Number | 2M7-30X8-50D |
UPC/GTIN Code | 013627185487 |
Voltage | 277 Volt |
Amperage | 0.7 Amp |
Color | Black |
Cable Construction | Constant Wattage |
Heater Type | Embedded Snow Melting Mats |
Power Cord Length | 10 Feet |
Heat Trace Termination Type | Terminate In The Field Heat Trace |
Type of Product | Embedded Snow Melting Mats |
Product Condition | New |
Features of EasyHeat 2M7-30X8-50D Sno*Melter Step Mat
The Easy Heat Sno*Melter Step Mats are designed to be embedded in concrete steps, either as part of a new installation or when repaving. Electric snow melting systems are a practical, economical way of preventing the buildup of ice and snow on steps. You can rely on your EasyHeat system to provide years of reliable service.
- Voltage: 277 Volt
- Wattage: 200 Watt
- Amperage: 0.7 Amps
- Number of Steps: 2
- Step Width: 3 ft
- Step Depth: 8 inch
- Riser Height: 8 inch
- Cold Lead Length: 10 ft
- Certifications: UL and CSA
Application Information
Operating costs for your area will depend upon the total hours of snowfall and upon the heating capacity you specify. Our recommended nominal heat density of 50 Watts per square foot provides quick response time, especially when used with automatic control (optional but recommended). In most cases, snow will melt at a rate that keeps up with average snowfall, minimizing accumulation of snow on the heated surface. In a heavy snowfall, when snow accumulates at a faster rate, extra heating time will be required for complete removal. An automatic control, set to allow additional running time after snowfall stops, ensures dry pavement and minimizes icy spots.