Features of Danfoss 088L1462 PX-F/RX-C 120 Volt 5 W/Ft Heating Cable

Danfoss RX-C Series self-regulating heating cable is designed to prevent ice dams by providing a continuous drain path for melting ice and snow along the roof edge, through the gutters, and then into the down spouts. The power output of the conductive core material increases or decreases in response to ambient temperature changes and occurs at every point along the length of the cable such that power output adjusts to the varying conditions along the length of the cable. The self-regulating effect means the cable can be overlapped without creating hot spots or causing a burn out. Maximum energy efficiency is ensured by producing heat only when and where it is needed. The Danfoss RX-C can be cut to length at the job site which greatly simplifies installation and reduces waste. br/>

• 120 Volt, 5 W/Ft at 50°F (+10°C)
• Output Power in Ice or Snow: 12W/ft. at 32°F (0°C)
• Length: Sold by the Foot (Cut-to-Length)
• Minimum Bend Radius: 1” (25 mm) (radius to the inside of the tape)
• Cable Size: 0.45” x 0.216” (11.5 x 5.5 mm)
• Max Temperature Rating: 150°F (65°C) Powered, 185°F (85°C) Un-Powered
• Minimum Use Temperature: -22°F (-30°C)
• Bus Wire: 16 AWG, (1.25 sq.mm), Tinned Copper
• Wire Insulation: TPE
• Outer Insulation: TPE Jacket (UV Stabilized Weatherproof Jacket)