Manufacturer Part Number | CXH-A-03-23-32-00-20-EP |
---|---|
Manufacturer | Chromalox |
Voltage | 240 Volt |
Phase | 3 Phase |
Wattage | 3000 Watt |
Control Voltage | 120 Volt |
Depth | 21 Inch |
Width of Product | 23.875 Inch |
Height of Product | 19.125 Inch |
Finish | Polyester Powder Coat |
Air Throw | 28 Feet |
Air Flow | 700 CFM |
Type of Product | Hazardous Location Heaters |
Product Condition | New |
Heater Type | Hazardous Location Heaters |
Features of Chromalox CXH-A-03-23-32-00-20-EP Explosion Proof Unit Heater
The Chromalox CXH-A Series Explosion Proof Electric Unit Heater is designed to heat areas that are classified as hazardous locations. Typical applications include heating areas in sewage treatment plants, petrochemical facilities, paint storage, and oil refineries.
- Voltage: 240 Volt
- Wattage: 3KW
- Phase: 3 Phase
- Control Voltage: 120 VAC
- Hazardous Area Classification: Low operating temperature for atmospheres having an ignition temperature higher than 165degC (329degF) code T3B. [Class I, Group C, D - Divisions 1 and 2], [Class II, Groups E, F, G - Divisions 1 and 2].
- Pre-Wired Explosion Proof Control Center with magnetic contactor and control circuit transformer.
- Quick acting auto-reset cutout.
- Cabinet: 14 gauge steel construction with polyester powder coat paint finish.
- Adjustable Louvers: Control the direction of airflow as needed.
- Rugged, Seamless, Copper Heating Elements are immersed in the sealed liquid-to-air heat exchanger.
- Factory Sealed Heat Exchanger: Features steel tubes with integral aluminum fins and filled with glycol-water heat transfer fluid.
- Safety Pressure Relief Device on the heat exchanger is factory helium leak tested to assure a leak proof design.
- Explosion Proof Ball Bearing Motor: Permanently lubricated and equipped with built-in thermal overload protection.
- Epoxy Coated Aluminum Fan: Prevents sparking