HF2B5107CA1L Markel Electric Unit Heater

SKU:

MARKEL645225


Manufacturer:

TPI Corp. (Markel/Raywall/Fostoria)

HF2B5107CA1L Markel Electric Unit Heater

Availability: 2 In Stock

Stock and shipping Info:

  • In stock products ordered before 4:00 pm EST ship same day.
  • If availability shows "0 In Stock" we will backorder the product for you.

Expert Salesman ready to help Need help selecting? Call our experts, 8am-5pm EST, M-F at 616-784-1121


FREE Ground Shipping (within the contiguous USA)


$732.05
Overview
TPI Corp. (Markel/Raywall/Fostoria) 5100 Series Electric Unit Heater - 208/240 Volt - 1 or 3 Phase - 5.6/7.5 KW - 24VAC Control Voltage - 24.3125"H x 21.5"W x 6.5"D - Catalog #: 06452202
More Information
UPC/GTIN Code 686334645225
Manufacturer Part Number HF2B5107CA1L
Manufacturer TPI Corp. (Markel/Raywall/Fostoria)
Phase 1 or 3 Phase
Depth 6.5 Inch
Width 21.5 Inch
Height 24.3125 Inch
Finish Powder Coat
Air Throw 22 Feet
Wattage 5600/7500 Watt
Voltage 208/240 Volt
Control Voltage 24 VAC
Air Flow 700 CFM
Product Type Horizontal Discharge Unit Heaters
Condition New

Features of Markel HF2B5107CA1L Electric Unit Heater


The Markel 5100 Series Horizontal or Vertical Mounted Electric Fan Forced Unit Heater is a commercial and Industrial grade unit heater.

  • CONSTRUCTION: Heavy 18 Gauge welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation and maintenance.
  • HEATING ELEMENT: Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow.
  • OVERHEAT PROTECTION: All units come equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur.
  • FAN and MOTOR: Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 KW - 20 KW models. Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally protected motors with sleeve bearings on 25 KW - 50 KW models. All motors mounted with rubber insulators to minimize vibration & noise. Fan over-ride purges unit of residual heat at shutdown.
  • LOUVER ASSEMBLY: Louvers are individually adjustable for directional control of air flow up to 15 degrees from straight horizontal. Optional diffusers available for down flow (vertical discharge) applications.
  • TEMPERATURE CONTROLS: Optional low voltage and line voltage thermostats are available with an adjustable temperature range of 40F to 90F. Units with model numbers ending in CA1 are factory wired for low voltage controls. 25 KW through 50 KW units are designed for two stage heating operation.

Additional Information


The Markel 5100 Series Electric Unit Heaters (3.3KW thru 50KW) can be mounted for horizontal or vertical discharge.

Horizontal unit heaters are recommended in low bay areas with maximum 15 to 18 foot ceilings. These should be concentrated along outside wall or other areas of greatest heat loss; spaced to set up a generally circular air movement, each heater supporting the air stream of the other.

Write Your Own Review
You're reviewing:HF2B5107CA1L Markel Electric Unit Heater
Your Rating

Copyright © 2018 Mor Electric Heating Assoc., Inc. All rights reserved.