Best Seller/Typically In Stock? | Yes |
---|---|
Manufacturer | Easy Heat |
Manufacturer Part Number | AHB016 |
UPC/GTIN Code | 013627109513 |
Color | Black |
Cable Construction | Constant Wattage |
Voltage | 120 Volt |
Wattage | 42 Watt |
Amperage | 0.4 Amp |
Length of Product | 6 Feet |
Watt/Foot | 7 Watt/Ft |
Heat Trace Termination Type | Pre Terminated Heat Trace |
Heat Trace Type | Pipe Heat Trace |
Listing Agency | UL |
Product Condition | New |
Features of EasyHeat AHB016 AHB Series Automatic Electric Water Pipe Heating Cable
EasyHeat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
- Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
- Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
- Cables are rated at 7 Watts per 1 ft (0.30 m)
- Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
- Plugs into a standard 120 Vac outlet, must be GFCI protected
- Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
- Pre-assembled and ready to install
- Integral thermostat saves energy by powering the cable only when needed
- One year limited warranty