Features of WrapOn 14140 Roof and Gutter Deicing Cable

The Wrap-On roof and gutter de-icing heat trace cable is a pre-assembled cable that has been designed for the sole purpose of preventing the formation of ice dams on pitched roofs with non-combustible tab shingles and in metal or plastic gutters and downspouts. It provides drainage channels so that as natural thawing occurs, water has a path to flow off the roof and through the gutters and downspouts.

• Voltage: 120 Volt
• Wattage: 700 Watt
• Cable Length: 140 Ft
• Power Connection: 6 Ft Power Cord with Plug
• Kit Includes Roof Clips and Cable Spacers

Additional Application Information

This roof and gutter deicing cable IS NOT FOR USE ON FLAT ROOFS nor is it intended to clear the roof of snow and ice. The installation of this product is simple and it can be used with either metal or plastic gutters. Read and follow all instructions and pay particular attention to the following points: Install the cable when the outside temperature is above 50F because at lower temperatures shingle material may be brittle; Clear all leaves, pine needles and debris from the roof, gutters and downspouts before operating the cable.

• DO NOT plug the cable in unless it has been completely uncoiled or it will be damaged and will no longer be functional.
• DO NOT overlap the cable or it will be damaged and will no longer be functional.
• Each package contains one ready-to-install cable, shingle clips, cable spacers and complete installation instructions. You will also need a tape measure, marker, gloves, ladder and a weatherproof GFCI outlet with control switch.