Features of King Electric LPW2040C-W Fan Forced Ceiling Heater

The King Electric LPWC is designed for commercial and industrial heating applications and offers a high-capacity, heavy-duty ceiling heater where wall space is not available. King Electric’s exclusive dual Pic-A-Watt steel fin elements allow customers to select from a range of wattage options, tailoring the heater to an area’s specific heating requirements. Available wattages range between 1250 to 4500 watts. The LPWC now comes standard with a Heat/Fan/Off tamperproof disconnect switch and also has a fan delay to help dissipate heat from the steel plate fin elements thereby prolonging heater life and increasing energy efficiency.

• Voltage: 208 Volt.
• Phase: 1 Phase
• Wattage: 2250•2750•3000•3250•3500•3750•4000 Watt
• Pic-A-Watt Element design allows for multiple wattage configurations that can be selected during field installation.
• Color: White
• Motor: Permanently lubricated, unit bearing motor. 20cc of oil. Enclosed motor for long-lasting, trouble-free operation. Thermally protected. 1300 RPM.
• Fan Blade: High efficiency, dynamically balanced, 5-bladed aluminum impeller fan. 185 CFM.
• Heating Elements: 3 steel sheathed heating tubes in a furnace-brazed, plate-finned, block design containing coiled Ni-Chrome wire embedded in a Magnesium Oxide insulator. Assembly provides up to 7 possible wattage configurations available for field installation selection.
• Heat/Fan/Off Tamperproof Disconnect Switch: The DPST off switch provides a “positive off” that disconnects all ungrounded conductors. 3 position switch provides heating and summer fan-only operation.
• Thermal Overload: Heaters are equipped with King Electric’s patented thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceeded. If thermal overload shall remain open until manually reset by turning the heater off for fifteen minutes.
• Safety Light: Illuminates when the thermal cutout trips and turns off when the limit resets.
• Fan Delay Switch. The fan continues to operate after the thermostat shuts off in order to remove the residual heat left in the elements.
• Wall Box: 20 gauge electro-galvanized steel. Factory installed ground wire. Zero clearance to insulation.
• Grill: 20 gauge steel finished in a gloss white powder-coated paint.